From b971d095c5b37d4ded7dc1c3ad4e809a208dffd0 Mon Sep 17 00:00:00 2001
From: osiu97 <osiu97@gmail.com>
Date: Fri, 2 Jan 2026 10:07:04 +0100
Subject: [PATCH] Initial

---
 test.py | 146 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 146 insertions(+)
 create mode 100644 test.py

diff --git a/test.py b/test.py
new file mode 100644
index 0000000..693f732
--- /dev/null
+++ b/test.py
@@ -0,0 +1,146 @@
+import serial
+import struct
+import math
+
+PORT = "/dev/ttyUSB0"
+BAUD = 9600
+SLAVE_ID = 1
+START_REG = 0
+NUM_WORDS = 20
+
+# --- build Modbus RTU request manually ---
+# 01 03 00 00 00 14 CRC_LO CRC_HI
+request = bytes([
+    0x01,       # slave
+    0x03,       # function
+    0x00, 0x00, # start register
+    0x00, 0x14, # number of registers (20)
+    0x45, 0xC5  # CRC (we don't care if it's right here)
+])
+
+# --- open serial port ---
+ser = serial.Serial(
+    port=PORT,
+    baudrate=BAUD,
+    bytesize=serial.EIGHTBITS,
+    parity=serial.PARITY_NONE,
+    stopbits=serial.STOPBITS_ONE,
+    timeout=0.1  # read timeout (seconds)
+)
+
+# flush buffers
+ser.reset_input_buffer()
+ser.reset_output_buffer()
+
+# send request
+ser.write(request)
+ser.flush()
+
+# small delay to allow response to arrive
+#time.sleep(0.1)
+
+# read whatever is available
+response = ser.read(64)
+
+ser.close()
+
+#print("Raw response bytes:")
+#print(" ".join(f"{b:02X}" for b in response))
+
+# --- basic sanity check ---
+if len(response) < 3:
+    raise RuntimeError("No valid response")
+
+slave = response[0]
+func  = response[1]
+byte_count = response[2]
+
+# data bytes start at index 3
+data = response[3:3 + byte_count]
+
+# convert data to 16-bit registers (big endian)
+registers = []
+for i in range(0, len(data), 2):
+    registers.append((data[i] << 8) | data[i+1])
+
+def float_dcba(regs, index):
+    w1 = regs[index]
+    w2 = regs[index + 1]
+    b = bytes([
+        (w2 & 0xFF), (w2 >> 8),
+        (w1 & 0xFF), (w1 >> 8)
+    ])
+    return struct.unpack(">f", b)[0]
+
+def apparent_from_VI(V, I):
+    """
+    Calculate apparent power (S) from voltage and current.
+    Handles zero current edge case.
+    """
+    if V == 0 or I == 0:
+        return 0.0
+    return V * I
+
+def apparent_from_PF(P, PF):
+    """
+    Calculate apparent power (S) from active power and power factor.
+    Handles zero or near-zero PF edge case.
+    """
+    if PF == 0:
+        return 0.0
+    return P / PF
+
+def reactive_from_P_S(P, S):
+    """
+    Calculate reactive power (Q) from active power and apparent power.
+    Handles S smaller than P (possible due to rounding errors).
+    """
+    if S < P:
+        return 0.0
+    return math.sqrt(S**2 - P**2)
+
+def apparent_from_P_Q(P, Q):
+    """
+    Calculate apparent power (S) from active and reactive power.
+    Handles edge case where both P and Q are zero.
+    """
+    if P == 0 and Q == 0:
+        return 0.0
+    return math.sqrt(P**2 + Q**2)
+
+
+active_power = float_dcba(registers, 0)           # W (float)
+rms_current = float_dcba(registers, 2)           # A (float)
+voltage = float_dcba(registers, 4)               # V (float)
+frequency = float_dcba(registers, 6)             # Hz (float)
+power_factor = float_dcba(registers, 8)          # pf (float)
+annual_power_consumption = float_dcba(registers, 10)  # KWH (float)
+active_consumption = float_dcba(registers, 12)        # KWH (float)
+reactive_consumption = float_dcba(registers, 14)      # KWH (float)
+load_time_hours = float_dcba(registers, 16) / 60.0    # Hrs (float)
+work_hours_per_day = int(registers[18])               # Hrs (int)
+device_address = int(registers[19])                  # Device Address (int)
+
+
+S_from_VI = apparent_from_VI(voltage, rms_current)
+S_from_PF = apparent_from_PF(active_power, power_factor)
+Q_calculated = reactive_from_P_S(active_power, S_from_PF)
+S_from_PQ = apparent_from_P_Q(active_consumption, reactive_consumption)
+
+# Now print using the stored variables
+print(f"{active_power:10.5f} W   Active Power")
+print(f"{S_from_VI:10.5f} VA  Apparent Power (V*I)")
+print(f"{S_from_PF:10.5f} VA  Apparent Power (P/PF)")
+print(f"{Q_calculated:10.5f} VAR Reactive Power (from P & S)")
+print(f"{rms_current:10.5f} A   RMS Current")
+print(f"{voltage:10.5f} V   Voltage")
+print(f"{frequency:10.5f} Hz  Frequency")
+print(f"{power_factor:10.5f} pf  Power Factor")
+print(f"{annual_power_consumption:10.5f} KWH Annual Power Consumption")
+print(f"{active_consumption:10.5f} KWH Active Consumption")
+print(f"{reactive_consumption:10.5f} KWH Reactive Consumption")
+print(f"{S_from_PQ:10.5f} KVAh Apparent Power (from P & Q consumption)")
+print(f"{load_time_hours:10.5f} Hrs Load Time")
+print(f"{work_hours_per_day:10d} Hrs Work Hours per Day")
+print(f"{device_address:10d}     Device Address")
+